The Deepcool PX1200G Fully Modular And Fully Up To Date PSU

Source: The Guru of 3D The Deepcool PX1200G Fully Modular And Fully Up To Date PSU

ATX 3.0, PCIe 5.0, And 12VHWPR

The Deepcool PX1200G has all the features you need to power new hardware, with an 80 PLUS Gold rating to prove it is fairly efficient at providing that power.  The single +12 V rail tops out at 100A, so even the most power thirsty GPU should run stable even under heavy load, and is the only component you’d need this amount of power for.  There are two EPS 12V and three 6+2 PCIe along with the 12VHPWR and a smattering of legacy connections, with decent lengths of 60-75 cm or over two feet if you prefer.

As to the performance that they Guru of 3D barely heard a thing, even at a 100% load which would not happen under normal usage the 135mm fan never produced more than 43dBA.  The power delivery is bang on as well, the PSU was made by CWT on the familiar CSZ platform so many other PSUs have been built on and the PX1200G matches their performance.  At 160 x 150 x 82mm it is rather small and for $240 it is reasonably priced.

There’s no reason not to consider the Deepcool PX1200G for your next system.

It is the first ATX 3.0 compatible unit from that company that we looked at. It is a fully modular PSU; even though the motherboard connectors are not permanently attached to the housing, you still must use most of them.

Video News

About The Author

Jeremy Hellstrom

Call it K7M.com, AMDMB.com, or PC Perspective, Jeremy has been hanging out and then working with the gang here for years. Apart from the front page you might find him on the BOINC Forums or possibly the Fraggin' Frogs if he has the time.

Leave a reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Latest Podcasts

Archive & Timeline

Previous 12 months
Explore: All The Years!